Before

BIOMEDICAL DESIGN AND MANUFACTURING LABORATORY/Before

Journal papers

  1. Kruger GH, Shih AJ, Hattingh DG, Niekerk Design, implementation and experimental analysis of intelligent agent architecture for manufacturing process optimization. Journal of Advanced Engineering Informatics. 2011; 25(4): 783-796.
  2. Kruger GH, Chen C, Blum JM, Shih AJ, Tremper Reactive agent and visualization system for anesthesia support in the operating room. Journal of Systemics, Cybernetics and Informatics. 2011; 9(5): 30-37.
  3. Tai BL, Dasch JM, Shih Evaluation and comparison of lubricant properties in minimum quantity lubrication machining. Machining Science and Technology. 2011; 15: 376-391.
  4. Johnson DD, Kirkpatrick AE, Shih AJ, Ashton-Miller The effect of lead use on back and shoulder postural muscle activity in healthy young adults. Human Factors. 2011; 53: 729-739.
  5. Miller SF, Arul S, Kruger GH, Pan TY, Shih Effect of localized metal matrix composite formation on spot friction welding joint strength. ASME Journal Engineering Material and Technology. 2011; 133(031099): 1-8.
  6. Fujiki M, Ni J, Shih Tool path planning for near-dry EDM milling with lead angle on curved surfaces. ASME Journal of Manufacturing Science and Engineering. 2011; 133(051005): 1-9.
  7. McGill CS, Schwartz JA, Moore JZ, McLaughlin PW, Shih Precision grid and hand motion for accurate needle insertion in brachytherapy. Medical Physics. 2011; 38(8): 4749-4759.
  8. Shen B, Shih AJ, Xiao A heat transfer model based on finite difference method for. ASME Journal of Manufacturing Science and Engineering. 2011; 133(031001): 1-10.
  9. White SB, Shih AJ, Pipe Boiling surface enhancement by electrophoretic deposition of particles from a nanofluid. International Journal of Heat and Mass Transfer. 2011; 54: 4370-4375.  
  10. Moore JZ, Malukhin K, Shih AJ, Ehmann Hollow needle tissue insertion force model. CIRP Annals – Manufacturing Technology. 2011; 60: 157-160.
  11. White SB, Shih AJ, Pipe Investigation of the electrical conductivity of propylene glycol based ZnO nanofluids. Nanoscale Research Letters. 2011; 6: 1-5.  
  12. Tai BL, Stephenson DA, Shih Improvement of flatness in face milling based on 3-D holographic laser metrology. International Journal of Machine Tool and Manufacture. 2011; 51: 483-490.
  13. Tai BL, Stephenson DA, White SB, Shih High air pressure in MQL deep hole drilling workpiece temperature. Advanced Materials Research. 2011; 189-193: 1732-1736.
  14. Fujiki M, Kim GY, Ni J, Shih Gap control for near-dry EDM milling with lead angle. International Journal of Machine Tools and Manufacture. 2011; 51: 77-83.
  15. Moore JZ, Zhang Q, McGill CS, McLaughlin PW, Zheng H, Shih AJ. Modeling of the plane needle cutting edge rake and inclination angles for. ASME Journal of Manufacturing Science and Engineering. 2010; 132(051005): 1-8.
  16. White SB, Shih AJ, Pipe KP. Effects of nanoparticle layering on nanofluid and base fluid pool boiling heat transfer from a horizontal surface under atmospheric pressure. Journal of Applied Physics. 2010; 107(114302): 1-6.
  17. Moore JZ, Shih Tissue oblique cutting flow angle and needle insertion contact length. Transactions of NAMRI/SME. 2010; 38: 711-718.
  18. Kalita P, Malshe A, Jiang W, Shih Tribological study of nano lubricant integrated soybean oil for minimum quantity lubrication (MQL) grinding. Transactions of NAMRI/SME. 2010; 38: 137-144.
  19. Dodde RE, Advincular A, Shih A novel technique for demonstrating the real-time sub-surface tissue thermal profile of two energized surgical instruments. Journal of Minimally Invasive Gynecology. 2009; 16: 599-603.  
  20. Zhou YY, Lin GS, Shih AJ, Hu Multi-physics modeling of assembly pressure effects on PEM fuel cell performance. ASME Journal of Fuel Cell Science and Technology. 2009; 6(041005): 1-7.  
  21. Zhou YY, Shih AJ, Hu Assembly pressure and membrane swelling in PEM fuel cells. Journal of Power Sources. 2009; 192: 544-551.
  22. Shen B, Shih Mininum quantity lubrication (MQL) grinding using vitrified CBN wheels. Transactions of NAMRI/SME. 2009; 37: 129-136.
  23. Moore JZ, McGill CS, McLaughlin PW, Zhang Q, Zheng H, Shih Blade oblique cutting of tissue for investigation of biopsy needle insertion. Transactions of NAMRI/SME. 2009; 37: 49-56.
  24. Fujiki M, Ni J, Shih Investigation of the effects of electrode orientation and fluid flow in near-dry EDM milling. International Journal of Machine Tool and Manufacture. 2009; 49: 749-758.
  25. Mei D, Kong T, Shih AJ, Chen Magnetorheological fluid controlled boring bar for chatter suppression. Journal of Materials Processing Technology. 2009; 209: 1861-1870.
  26. Kao CC, Shih Design and tuning of the adaptive fuzzy logic controller for micro-hole electrical discharge machining. Journal of Manufacturing Processes. 2008; 10: 61-73.
  27. Shen B, Xiao G, Guo C, Malkin S, Shih Thermocouple fixturing method for grinding temperature measurement. ASME Journal of Manufacturing Science and Engineering. 2008; 130(051014): 1-8.  
  28. Kao CC, Shih AJ, Miller Fuzzy logic control of micro-hole electrical discharge machining. ASME Journal of Manufacturing Science and Engineering. 2008; 130(064502): 1-6.
  29. Zhu J, Ni J, Shih Robust machine tool thermal error modeling through thermal modal analysis. ASME Journal of Manufacturing Science and Engineering. 2008; 130(061006): 1-9.
  30. Arul S, Kruger GH, Miller SF, Mallick PK, Pan TY, Shih Experimental study of joint performance in spot friction welding of 6111-T4 aluminum alloy. Science and Technology of Welding and Joining. 2008; 13: 629-637.
  31. Shen B, Shih AJ, Tung Application of nanofluids in minimum quantity lubrication grinding. STLE Tribology Transactions. 2008; 130: 730-737. [selected as the highlight article for the Tribology & Lubrication Technology, a STLE monthly magazine]
  32. Huang Z, Shih AJ, Ni Quantitative evaluation of powder spray effects on stereovision measurements. Measurement Science and Technology. 2008; 19(025502): 1-11.
  33. Shen B, Kalita P, Malshe AP, Shih Performance and behavior of novel MoS2 nanoparticles based grinding fluids in minimum quantity lubrication grinding. Transactions of NAMRI/SME. 2008; 36: 357-364.
  34. Johnson EC, Li R, Shih AJ, Hanna Design of experiment based force modeling of the face grinding process. Transactions of NAMRI/SME. 2008; 36: 241-248.
  35. Chang JH, Hocheng H, Chang HY, Shih Metal removal rate of thiobacillus thiooxidans without pre-secreted metabolite. Journal of Materials Processing Technology. 2008; 201(1-3): 560-564.
  36. Dodde RE, Miller SF, Geiger JD, Shih Thermal-electric finite element analysis and experimental validation of bipolar electrosurgical cautery. ASME Journal of Manufacturing Science and Engineering. 2008; 130(021015): 1-8.
  37. Shih Biomedical manufacturing – a new frontier of manufacturing research. ASME Journal of Manufacturing Science and Engineering. 2008; 130(021009): 1-8.
  38. Tao J, Shih AJ, Ni Experimental study of the dry and near-dry electrical discharge milling processes. ASME Journal of Manufacturing Science and Engineering. 2008; 130(011002): 1-9.
  39. Tao J, Shih AJ, Ni J. Near-dry EDM milling of mirror-like surface finish. International Journal of Electrical Machining. 2008; 13: 29-34.
  40. Moore JZ, Somoza RJ, Shih AJ, Filipi Z, Moskalik AJ, Johnson Characterization of the fluid deaeration device for a hydraulic hybrid vehicle system. SAE Transactions. 2008; 2008-01-0308.
  41. Parlar Z, Bakkal M, Shih Sliding tribological characteristics of Zr-based bulk metallic glass. Intermetallics. 2008; 16: 34-41.
  42. Li R, Riester L, Watkins TR, Blau PJ, Shih Metallurgical analysis and nanoindentation characterization of Ti-6Al-4V workpiece and chips in high throughput drilling. Materials Science and Engineering: A. 2008; 472: 115-124.
  43. Kao CC, Shih Form measurements of micro-holes. Measurement Science and Technology. 2007; 18: 3603-3611.
  44. Li R, Shih High throughput drilling of titanium alloys. Chinese Journal of Mechanical Engineering (English Edition). 2007; 20: 62-66.
  45. Kao CC, Tao J, Shih Near dry electrical discharge machining. International Journal of Machine Tools and Manufacture. 2007; 47: 2273-2281.
  46. Li R, Shih Tool temperature in titanium drilling. ASME Journal of Manufacturing Science and Engineering. 2007; 129: 740-749.  
  47. Miller SF, Shih Thermo-mechanical finite element modeling of the friction drilling process. ASME Journal of Manufacturing Science and Engineering. 2007; 129: 531-538.
  48. Li R, Shih Spiral point drill temperature and stress in high-throughput drilling of titanium. International Journal of Machine Tools and Manufacture. 2007; 47: 2005-2017.
  49. Li R, Shih Finite element modeling of high-throughput drilling of Ti-6Al-4V. Transactions of NAMRI/SME. 2007; 35: 73-80.
  50. Chastagner MW, Shih Abrasive jet machining for edge generation. Transactions of NAMRI/SME. 2007; 35: 359-366.
  51. Huang CH, Jan LC, Li R, Shih A three-dimensional inverse problem in estimating the applied heat flux of a titanium drilling — theoretical and experimental studies. International Journal of Heat and Mass Transfer. 2007; 50: 3265-3277.
  52. Arul SG, Pan T, Schwartz WJ, Shih AJ, Malick PK, Miller SF. Effects of surface treatment (lubricant) on spot friction welded joints made of 6111-T4 aluminum sheets. SAE Transactions. 2007; 2007-01-1706.
  53. Miller SF, Blau PJ, Shih Tool wear in friction drilling. International Journal of Machine Tools and Manufacture. 2007; 47: 1636-1645.
  54. Johnson DJ, Warner R, Shih Surface roughness and material removal rate in machining using microorganisms. ASME Journal of Manufacturing Science and Engineering. 2007; 129: 223-227.
  55. Zhou YY, Lin GS, Shih AJ, Hu A micro-scale model for predicting contact resistance between bipolar plate and gas diffusion layer in PEM fuel cells. Journal of Power Sources. 2007; 163: 777-783.
  56. Li R, Hegde P, Shih High throughput drilling of titanium Alloys. International Journal of Machine Tools and Manufacture. 2007; 47: 63-74.
  57. Huang Z, Shih AJ, Ni Laser interferometry hologram registration for three-dimensional precision measurements. ASME Journal of Manufacturing Science and Engineering. 2006; 128: 1006-1013.
  58. Shih AJ, Huang Three-dimensional optical measurements of porous foams. ASME Journal of Manufacturing Science and Engineering. 2006; 128: 951-959.
  59. Huang Z, Shih AJ, Ni Phase unwrapping for large depth-of-field 3D laser holographic interferometry measurement of laterally discontinuous surfaces. Measurement Science and Technology. 2006; 17: 3110-3119.
  60. Kao CC, Shih Sub-nanosecond monitoring of micro-hole electrical discharge machining pulses and modeling of discharge ringing. International Journal of Machine Tools and Manufacture. 2006; 46: 1996-2008.
  61. Cookson EJ, Floyd DE, Shih Design and analysis of metal foam electrical resistance heater. International Journal of Mechanical Sciences. 2006; 48: 1314-1322.
  62. Miller SF, Li R, Wang H, Shih Experimental and numerical analysis of the friction drilling process. ASME Journal of Manufacturing Science and Engineering. 2006; 128: 802-810.
  63. Miller SF, Tao J, Shih Friction drilling of cast metals. International Journal of Machine Tools and Manufacture. 2006; 46: 1526-1535.
  64. Guduru RK, Darling KA, Scattergood RO, Koch CC, Murty KL, Bakkal M, Shih Shear punch tests for a bulk metallic glass. Intermetallics. 2006; 14: 1411-1416.
  65. Kao CC, Tao J, Lee S, Shih Dry wire electrical discharge machining of thin workpiece. Transactions of NAMRI/SME. 2006; 34: 253-260.
  66. Li R, Shih Finite element modeling of 3D turning of titanium. International Journal of Advanced Manufacturing Technology. 2006; 29: 253-261.
  67. Xu LM, Shen B, Shih Vitreous bond silicon carbide wheel for grinding of silicon nitride. International Journal of Machine Tools and Manufacture. 2006; 46: 631-639.
  68. Luo J, Ding H, Shih Induction-heated tool machining of elastomers – part I: finite difference thermal modeling and experimental validation. Machining Science and Technology. 2005; 9: 547-565.
  69. Luo J, Ding H, Shih Induction-heated tool machining of elastomers – part II: chip morphology, cutting forces, and machined surfaces. Machining Science and Technology. 2005; 9: 567-588.
  70. Miller SF, Blau PJ, Shih AJ. Microstructural alterations associated with friction drilling of steel, aluminum, and titanium. Journal of Materials Engineering and Performance. 2005; 14: 647-653.
  71. Miller SF, Qu J, Kao CC, Shih Investigation of wire electrical discharge machining of thin cross-sections and compliant mechanisms. International Journal of Machine Tools and Manufacture. 2005; 45: 1717-1725.
  72. Qu J, Shih AJ, Scattergood RO, Luo Abrasive micro-blasting of surface layers of electrical discharge machined WC-Co composite. Journal of Materials Processing Technology. 2005; 166: 440-448.
  73. Lemaster RL, Shih AJ, Yu Blasting and erosion wear of wood using sodium bicarbonate and plastic media. Forest Products Journal. 2005; 55: 59-64.
  74. Luo J, Shih Inverse heat transfer solution of the induction heat flux. ASME Journal of Manufacturing Science and Engineering. 2005; 127: 555-563.
  75. Kong J, Hendrichsen M, Shih Infrared thermometry measurement of temperature distribution in microwave regeneration of diesel particulate filters. International Journal of Engine Research. 2005; 6: 61-71.
  76. Bakkal M, McSapdden SB, Shih AJ, Scattergood Light emission, chip morphology, and burr formation in drilling the bulk metallic glass. International Journal of Machine Tools and Manufacture. 2005; 45: 741-752.
  77. Bakkal M, McSapdden SB, Shih AJ, Scattergood Thrust force, torque, and tool wear in drilling the bulk metallic glass. International Journal of Machine Tools and Manufacture. 2005; 45: 863-872.
  78. Hardin CW, Shih AJ, Lemaster Diamond wire machining of wood. Forest Products Journal. 2004; 54: 50-55.  
  79. Shih AJ, McCall Wear and kinematics of tool blades for scrap tire shredding. Machining Science and Technology. 2004; 8: 193-210.
  80. Bakkal M, Shih AJ, Scattergood Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass. International Journal of Machine Tools and Manufacture. 2004; 44: 915-925.
  81. Hardin CW, Qu J, Shih Fixed abrasive diamond wire saw slicing of single crystal SiC wafers. Materials and Manufacturing Processes. 2004; 19: 355-367.
  82. Kong J, Shih Infrared thermometry for diesel exhaust aftertreatment temperature measurement. SAE Transactions. 2004; 2004-01-0962.
  83. Strenkowski JS, Hsieh CC, Shih An analytical finite element technique for predicting thrust force and torque in drilling. International Journal of Machine Tools and Manufacture. 2004; 44: 1413-1421.
  84. Shih AJ, Lewis MA, Strenkowski End milling of elastomers – fixture design and tool effectiveness for material removal. ASME Journal of Manufacturing Science and Engineering. 2004; 126: 115-123.  
  85. Shih AJ, Lewis MA, Luo J, Strenkowski Chip morphology and forces in end milling of elastomers. ASME Journal of Manufacturing Science and Engineering. 2004; 126: 124-130.
  86. Miller SF, Shih AJ, Qu Investigation of the spark cycle on material removal rate in wire electrical discharge machining. International Journal of Machine Tools and Manufacture. 2004; 44: 391-400.
  87. Bakkal M, Shih AJ, Scattergood RO, Liu Machining of a Zr-Ti-Al-Cu-Ni metallic glass. Scripta Materialia. 2004; 50: 583-588.
  88. Bakkal M, Liu CT, Watkins T, Scattergood RO, Shih AJ. Oxidation and crystallization of Zr-based bulk metallic glass due to machining. Intermetallics. 2004; 12: 195-204.
  89. Garrell MG, Ma BM, Shih AJ, Lara-Curzio E, Scattergood RO. Mechanical properties of PPS bonded Nd-Fe-B permanent magnets. Materials Science and Engineering: A. 2003; 359: 375-383.
  90. Qu J, Shih AJ. Analytical surface roughness parameters of an ideal profile consisting of elliptical or circular arcs. Machining Science and Engineering. 2003; 7: 281-294.
  91. Shih AJ, Curry AC, Scattergood RO, Yonushonis TM, Gust DJ, Grant MB, McSpadden SB, Watkins T. Cost-effective grinding of zirconia using the dense vitreous bond silicon carbide wheel. ASME Journal of Manufacturing Science and Engineering. 2003; 125: 297-303.
  92. Boothe BJ, Shih AJ, Kong J, Roberts WJ. Goniometric characteristics of optical fibers for temperature measurement in diesel engine exhaust filters. Measurement Science and Technology. 2003; 14: 563-572.  
  93. Curry AC, Shih AJ, Scattergood RO, Kong J, McSpadden SB. Grinding temperature measurements in MgO PSZ using infrared spectrometry. Journal of the American Ceramic Society. 2003; 86: 333-341.  
  94. Clark WI, Shih AJ, Hardin CW, Lemaster RL, McSpadden SB. Fixed abrasive diamond wire machining – part I: process monitoring and wire geometry and tension. International Journal of Machine Tools and Manufacture. 2003; 43: 523-532.
  95. Clark WI, Shih AJ, Lemaster RL, McSpadden SB. Fixed abrasive diamond wire machining – part II: experiment design and results. International Journal of Machine Tools and Manufacture. 2003; 43: 533-542.  
  96. Garrell MG, Shih AJ, Lara-Curzio E, Scattergood RO. Finite-element analysis of stress-concentration in ASTM D638 tensile test specimens. Journal of Testing and Evaluation. 2003; 31: 52-57.  
  97. Garrell MG, Shih AJ, Ma BM, Lara-Curzio E, Scattergood RO. Mechanical properties of nylon bonded Nd-Fe-B permanent magnets. Journal of Magnetism and Magnetic Materials. 2003; 257: 32-43.  
  98. Qu J, Reister L, Shih AJ, Scattergood RO, Lara-Curzio E. Nanoindentation characterization of surface layers of electrical discharge machined WC-Co. Materials Science and Engineering: A. 2003; 344: 125-131.
  99. Rhoney BK, Shih AJ, Scattergood RO, Akemon JL, Gust DJ, Grant MB. Wire electrical discharge machining of metal bond diamond wheels for ceramic grinding. International Journal of Machine Tool and Manufacture. 2002; 42: 1355-1362.  
  100. Qu J, Shih AJ, Scattergood RO. Development of the cylindrical wire electrical discharge machining process: part I: concept, design, and material removal rate. ASME Journal of Manufacturing Science and Engineering. 2002; 124(3): 702-707.
  101. Qu J, Shih AJ, Scattergood RO. Development of the cylindrical wire electrical discharge machining process: part II: surface integrity and roundness. ASME Journal of Manufacturing Science and Engineering. 2002; 124(3): 708-714.
  102. Rhoney BK, Shih AJ, Scattergood RO, Ott R, McSpadden SB. Wear mechanism of metal bond diamond wheels trued by wire electrical discharge machining. Wear. 2002; 252: 644-653.
  103. Strenkowski JS, Shih AJ, Lin JC. An analytical finite element model for predicting three-dimensional tool forces and chip flow. International Journal of Machine Tools and Manufacture. 2002; 42: 723-731.
  104. Shih AJ, Yan HS. Synthesis of a single-loop, overconstrained spatial 6R mechanism for two-position cylindrical rigid body guidance. Mechanism and Machine Theory. 2002; 37: 61-73.
  105. Shih AJ, Akemon JL. Wear of the blade diamond tools in truing vitreous bond grinding wheels. part I – wear measurement and results. Wear. 2001; 250: 587-592.
  106. Shih AJ, Clark WI, Akemon JL. Wear of the blade diamond tools in truing vitreous bond grinding w part II – truing and grinding forces and wear mechanism. Wear. 2001; 250: 593-603.
  107. Shih A new regulating wheel truing method for through-feed centerless grinding. ASME Journal of Manufacturing Science and Engineering. 2001; 123(2): 319-324.
  108. Shih An experimental investigation of rotary truing and dressing of vitreous bond wheels for ceramic grinding. International Journal of Machine Tools and Manufacture. 2000; 40: 1755-1774.
  109. Shih AJ, Grant MB, Yonushonis TM, Morris TO, McSpadden High speed and high material removal rate grinding of ceramics using the vitreous bond CBN wheel. Machining Science and Technology. 2000; 4(1): 43-58.
  110. Tricard M, Gust DJ, Shih Systems approach for the ceramic thru-feed centerless grinding. Machining Science and Technology. 1999; 3(2): 201-219.
  111. Shih AJ, Lee Precision cylindrical face grinding. Precision Engineering. 1998; 23(3): 177-184.
  112. Tu JF, Corless M, Gehrich MJ, Shih Experimental study of a precision hydrodynamic wheel spindle for submicron cylindrical grinding. Precision Engineering. 1988; 22(1): 43-57.
  113. Shih Rotary truing of the vitreous bond diamond grinding wheels using metal bond diamond disks. Machining Science and Technology. 1998; 2: 13-28.
  114. Shih AJ, Yonushonis TM, Grant MB, Morris TO, McSpadden Vitreous bond CBN wheel for high speed grinding of ceramic and M2 steel. Transactions of NAMRI/SME. 1998; 26: 195-200.
  115. Shih Finite element analysis of orthogonal metal cutting mechanics. International Journal of Machine Tools and Manufacture. 1996; 36: 255-273.
  116. Shih Finite element analysis of the rake angle effects in orthogonal metal cutting. International Journal of Mechanical Sciences. 1996; 38: 1-17.
  117. Shih Finite element simulation of orthogonal metal cutting. ASME Journal of Engineering for Industry. 1995; 117: 84-93.
  118. Shih Kinematics of cycloidal rotary internal combustion engine mechanism. ASME Journal of Mechanical Design. 1993; 115: 953-959.
  119. Shih Analysis and comparison of the epicycloidal and hypocycloidal rotary engine mechanism. ASME Journal of Mechanical Design. 1993; 115: 960-966.
  120. Shih AJ, Yang Experimental and finite element predictions of residual stresses due to orthogonal metal cutting. International Journal for Numerical Method in Engineering. 1993; 36: 1487-1507.
  121. Kao C, Shih A radial method for mechanism optimal design. Engineering Optimization. 1992; 20: 179-186.
  122. Shih AJ, Yang Experimental and finite element simulation methods for rate-dependent metal forming processes. International Journal for Numerical Method in Engineering. 1991; 31: 345-367.
  123. Yang HT, Heinstein M, Shih Adaptive 2D finite element simulation of metal forming processes. International Journal for Numerical Methods in Engineering. 1989; 28: 1409-1428.
  124. Hwang WM, Shih Optimal synthesis of suspension mechanism with variable leverage ratio. Journal of the Chinese Society of Mechanical Engineers. 1987; 8: 43-50.
  125. Hwang WM, Shih AJ. A design for automatic machining of the die for self-tapping screw. Journal of the Chinese Society of Mechanical Engineers. 1986; 7: 109-113.

Conference papers

  1. Xu K, Zhao J, Geiger JD, Shih AJ, Zheng M. Design of an endoscopic stitching device for surgical obesity treatment using a N.O.T.E.S approach. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), September 25-30, 2011, San Francisco, California, USA.
  2. Raghavan M, Davis M, Esmonde-White FWL, Marini J, Shih AJ, Morris MD, Kozloff K. Microdamage-induced compositional changes in brtl/+ and wildtype mice: a raman imaging study. Orthopatic Research Society 2011 Annual Meeting, Feb 4-7, 2012, San Francisco, California, USA.
  3. Tai BL, Stephenson DA, White SB, Shih AJ. Finite element modeling of the workpiece thermal distortion in MQL deep hole drilling. 2011 ASME Manufacturing Science and Engineering Conference (MSEC), June 13-17, 2011, Corvallis, Oregon, USA.
  4. Tai BL, Stephenson DA, White SB, Shih AJ. High air pressure in MQL deep hole drilling workpiece temperature. 2nd International Conference on Manufacturing Science and Engineering (ICMSE 2011), April 9-11, 2011, Guilin, China.
  5. Davis M, Kovacic B, Marini J, Shih AJ, Kozloff K. Increased susceptibility to microdamage in brtl/+ mouse model for osteogenesis imperfecta. Orthopatic Research Society 2011 Annual Meeting, January 13-16, 2011, Long Beach, California, USA.
  6. Kovacic B, Marini J, Shih AJ, Kozloff K. Development of anatomic models to assess fracture toughness of mouse and rat bone. Orthopatic Research Society 2011 Annual Meeting, January 13-16, 2011, Long Beach, California, USA.
  7. Tai BL, Stephenson DA, Shih AJ. An inverse heat transfer method for determining workpiece temperature in MQL deep hole drilling. ASME Manufacturing Science and Engineering Conference (MSEC), Oct 12-15, 2010, Erie, Pennsylvania, USA.
  8. Gao D, McGill CS, Moore JZ, Zheng H, McLaughlin PW, Zhang Q, Li S, Shih Study on needle deflection and insertion force during needle insertion. Proceedings of the 9th International Conference on Frontiers of Design and Manufacturing, July 17-19, 2010, Changsha, China.
  9. Tai BL, Dasch JM, Shih AJ. Evaluation of lubricants for minimum quantity lubrication. 2010 STLE Annual Meeting & Exhibition, May 16-20, 2010, Las Vegas, Nevada, USA.
  10. Chen C, Kruger GH, Blum JM, Shih AJ, Tremper KK. Reactive agent and visualization system for anesthesia support in the operating room. International Conference on Engineering and Meta-Engineering: ICEME 2010, April 6-9, 2010, Orlando, Florida, USA.
  11. Zhou Y, Lin G, Shih AJ, Hu SJ. Assembly and performance modeling of proton exchange membrane fuel cells. Proceedings of the 2009 International Manufacturing Science and Engineering Conference, Oct. 4-7, 2009, West Lafayette, Indiana, USA.
  12. Tai BL, Stephenson DA, Shih AJ. Improvement of surface flatness in face milling by varying the tool cutting depth and feed rate. Proceedings of the 2009 International Manufacturing Science and Engineering Conference, Oct. 4-7, 2009, West Lafayette, Indiana, USA.
  13. Tai BL, Dasch JM, Shih AJ. Evaluation of lubricants for minimum quantity lubrication (MQL) machining. Proceedings of the 2009 International Manufacturing Science and Engineering Conference, Oct. 4-7, 2009, West Lafayette, Indiana,, USA. (presentation only due to GM’s refusal to sign the ASME copyright agreement)
  14. Arul SG, Kruger GH, Miller SF, Pan TY, Shih AJ. Spot friction welding joint strength improvement using localized metal matrix ceramic composite formation. Proceedings of the 2009 International Manufacturing Science and Engineering Conference, Oct. 4-7, 2009, West Lafayette, Indiana, USA.
  15. Moore JZ, Zhang Q, McGill CS, Zheng H, McLaughlin PW, Shih AJ. Modeling for plane and curved needle tip cutting edge geometry. 7th International Conference on Manufacturing Research (ICMR09), September 8-10, 2009, University of Warwick, UK.
  16. Moore JZ, Zhang Q, McGill CS, Zheng H, McLaughlin PW, Shih AJ. Needle cutting edge modeling for tissue machining. 12th CIRP Conference on Modelling of Machining Operations, May 7-8, 2009, San Sebastian, Spain.
  17. Kalita P, Carlson K, Shen B, Shih AJ, Malshe AP. Exploring performance of novel MoS2 nanoparticles for MQL grinding through tribological measurements. 2nd International & 23rd All India Manufacturing Technology, Design and Research Conference, Chennai, December 15-17, 2008, India Institute of Technology, Madras, India.
  18. Tao J, Ni J, Shih AJ. Dry and near-dry EDM milling of ultra-fine surface finish. Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing, Sept. 23-26, 2008, Tianjin, China.
  19. Zheng H, Zhang Q, Moore JZ, Schwartz J, McGill C, McLaughlin PW, Shih AJ. Biopsy needle tissue cutting analysis. Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing, Sept. 23-26, 2008, Tianjin, China.
  20. Arul S, Kruger GH, Miller SF, Pan TY, Shih Spot friction weld strength improvement through in-process metal matrix formation. Proceedings of the 2008 International Manufacturing Science and Engineering Conference, Oct. 7-10, 2008, Evanston, Illinois, USA.
  21. Gee JS, Dodde RE, Geiger JD, Shih AJ. Experimental and finite element analysis of the thermal-electric process in monopolar electrosurgical thermal management. Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA08, July 7-9, 2008, Haifa, Israel.
  22. Shen B, Dodde RE, Johnson EC, Chang K, Miller SF, Geiger JD, Shih AJ. Biomedical manufacturing – translational research between manufacturing and healthcare. 2007 International Conference on Advanced Manufacture, SME, Nov. 26-28, Tainan, Taiwan.
  23. Dodde RE, Advincula AP, Shih AJ. A novel technique for demonstrating the real-time sub-surface tissue thermal profile of two energized surgical instruments. American Association of Gynecologic Laparoscopists, AAGL 36th Annual Meeting, Nov. 14-17, 2007, Washington, D.C., USA.
  24. Shen B, Shih AJ, Tung S. Application of nanofluids in minimum quantity lubrication grinding. ASME/STLE International Joint Tribology Conference, Oct 22-24, 2007, San Diego, California, USA.
  25. Chang JH, Hocheng H, Chang HY, Shih AJ. Metal removal rate of thiobacillus thiooxidans without pre-secreted metabolite. Conference Advances of Materials and Procssing Technology, Oct 7-11, 2007, Daejeong, Korea.
  26. Chastagner MW, Miller SF, Geiger JD, Shih AJ. Tissue joining using the electrosurgical method. Proceedings of the 2007 International Manufacturing Science and Engineering Conference MSEC2007, October 15-17, 2007, Atlanta, Georgia, USA.
  27. Dodde RE, Miller SF, Geiger JD, Shih AJ. Thermal-electric finite element analysis of electrosurgical cautery process. Proceedings of the 2007 International Manufacturing Science and Engineering Conference MSEC2007, October 15-17, 2007, Atlanta, Georgia, USA.
  28. Kao CC, Miller SF, Shih AJ. Fuzzy logic control system for micro-hole electrical discharge machining. Proceedings of the 2007 International Manufacturing Science and Engineering Conference MSEC2007, October 15-17, 2007, Atlanta, Georgia, USA.
  29. Marusich TD, Usui S, Ma J, Stephenson DA, Shih AJ. Finite element modeling of drilling processes with solid and indexable tooling in metals and stack-ups. 10th CIRP International Workshop on Modeling of Machining Operations, Aug. 27-28, 2007, Reggio Calabria, Itlay.
  30. Shen B, Shih AJ. Thermocouple fixturing method for grinding temperature measurement. International Symposium on Advanced Abrasive Technology 2007, Sep. 26-28, 2007, Dearborn, MI, USA.
  31. Feng J, Kim GY, Shih AJ, Ni J. Investigation of the micro-end grinding of ceramics using a sintered metal-bonded microgrinding wheel. International Symposium on Advanced Abrasive Technology 2007, Sep. 26-28, 2007, Dearborn, Michigan, USA.
  32. Tao J, Shih AJ. Dry and near-dry electrical discharge milling processes. 15th International International Symposium on Electromachining (ISEM XV), April 23-27, 2007, Pittsburgh, Pennsylvania.
  33. Kao CC, Tao J, Shih AJ. Water mist near dry wire and drilling electrical discharge machining and gap distance modelling. 15th International International Symposium on Electromachining (ISEM XV), April 23-27, 2007, Pittsburgh, Pennsylvania.
  34. Huang Z, Shih AJ, Ni J. Three dimensional optical measurements for automotive applications. International Conference on Competitive Manufacturing COMA’07, February 3-5, 2007, Stellenbosch University, South Africa.
  35. Marusich TD, Usui S, Aphale R, Saini N, Li R, Shih AJ. Three-dimensional finite element modeling of drilling processes. ASME Manufacturing Science and Engineering Conference, Oct. 8-12, 2006, Ypsilanti, Michigan, USA.
  36. Miller SF, Shih AJ. Friction drilling – a chipless hole-making process. ASME Manufacturing Science and Engineering Conference, Oct. 8-12, 2006, Ypsilanti, Michigan, USA.
  37. Huang Z, Shih AJ, Ni J. Laser interferometry hologram registration for three-dimensional precision measurements. ASME Manufacturing Science and Engineering Conference, Oct. 8-12, 2006, Ypsilanti, Michigan, USA.
  38. Shih AJ. Biomedical manufacturing – a new frontier of manufacturing research. ASME Manufacturing Science and Engineering Conference, Oct. 8-12, 2006, Ypsilanti, Michigan, USA.
  39. Tao J, Kao CC, Shih AJ. Near dry electrical discharge machining. 7th International Conference on Frontiers of Design and Manufacturing and 7th S. M. Wu Symposium on Manufacturing Sciences, June 21-24, 2006, Guangzhou, China.
  40. Xu LM, Shih AJ, Ma CX, Hu DJ. Prediction of surface quality for silicon carbide wheel grinding of silicon nitride. 12th International Manufacturing Conference, Sep. 21-23, 2006, China.
  41. Li R, Shih AJ. High throughput drilling of Ti alloys. 7th International Conference on Frontiers of Design and Manufacturing and 7th S. M. Wu Symposium on Manufacturing Sciences, June 21-24, 2006, Guangzhou, China.
  42. Huang Z, Shih AJ, Ni J. Quantitative evaluation of powder spray effects on three-dimensional stereovision measurements of machined components. CIRP-Sponsored 3rd International Conference on Reconfigurable Manufacturing, May 9-12, 2005, Ann Arbor, Michigan, USA.
  43. Miller SF, Qu J, Shi E, Kao CC, Shih AJ. Investigation of wire electrical discharge machining of thin cross-sections and compliant mechanisms. ASME IMECE, Nov. 13-19, 2004, Anaheim, California, USA.
  44. Li R, Shih AJ. Finite element modeling of 3D turning of titanium. ASME IMECE, Nov. 13-19, 2004, Anaheim, California, USA.
  45. Kong J, Shih AJ. Infrared thermometry for diesel exhaust aftertreatment temperature measurement. 2004 SAE World Congress, March 8-11, 2004, Detroit, Michigan, USA.
  46. Hardin CW, Qu J, Shih AJ. Fixed abrasive diamond wire saw slicing of single crystal SiC wafers. ASME IMECE, Nov.15-21, 2003, Washington, D.C., USA.
  47. Miller SF, Shih AJ. Investigation the effect of spark cycle on the material removal rate in wire electrical discharge machining. ASME IMECE, Nov.15-21, 2003, Washington, D.C., USA.
  48. Kong J, Bakkal M, Miller SF, Shih AJ. Temperature measurement in ceramic grinding, machining of bulk metallic glass, and electrical discharge machining. NSF Workshop on Research Needs in Thermal Aspects of Material Removal Processes, June 2003, Stillwater, Okalahoma, USA.
  49. Garrell MG, Ma BM, Lara-Curzio E, Shih AJ, Scattergood RO. Mechanical properties of injection molded Nd-Fe-B permanent magnets. Intermag Europe 2002, April 28 – May 2, 2002, Amsterdam, Netherlands.
  50. Qu J, Shih AJ, Scattergood RO. Development of the cylindrical wire EDM process. Symposium of Nontraditional Manufacturing Research and Applications, ASME IMECE, May 1, 2001, New York, New York, USA.
  51. Shih AJ, Akemon JL. Wear of the blade diamond tools in truing vitreous bond grinding wheels. part I – wear measurement and results. 2001 Wear of Materials, April 22-26, 2001, Vancouver BC, Canada.  
  52. Shih AJ, Clark WI, Akemon JL. Wear of the blade diamond tools in truing vitreous bond grinding wheels. part II – truing and grinding forces and wear mechanism. 2001 Wear of Materials, April 22-26, 2001, Vancouver BC, Canada.    
  53. Gust DJ, Shih AJ, Tricard M, Subramanian K. An approach for thru-feed grinding of ceramic. Symposium on Advanced Machining and Finishing Processes for Ceramics, Composites, and High Temperature Alloys, ASME World Congress & Expo., 1996, Atlanta, Georgia, USA.
  54. Shih AJ. Finite element analysis of the rake angle effects in orthogonal metal cutting. K. F. Ehmann, Ed., Manufacturing Science and Engineering, ASME, 1993.
  55. Shih AJ, Yang HT, Chandrasekar S. Experimental and finite element simulation of metal cutting process with strain rate and temperature effects. Klamecki, B.E., and K. J. Weinmann, Ed., Fundamental Issues in Machining, ASME, 1990.
  56. Wang KF, Shih AJ, Heinstein M, Yang HT, Chandrasekar S. Finite element analysis of heat treatment, metal cutting and forming. International Conference on Adv. in Structural Testing, Analysis, and Design, 1990, Bangalore, India.
  57. Hwang WM, Shih AJ. Analysis and optimal synthesis of rear suspension mechanisms with single shock absorber for motorcycle. Proceedings of the 2nd National Conference on Mechanical Engineering, 1985, Kaoshiung, Taiwan.
  58. Shih AJ, Hwang WM. A design for automatic manufacture of self-tapping screw dies. Proceedings of the 2nd National Conference on Mechanical Engineering, 1985, Kaoshiung, Taiwan.
  59. Rooney D, Stephenson F, Liao P, Savastano L, Sagher O, Shih A, Tai B. Development of preliminary validation of a novel ventriculostomy simulator. The International Meeting for Simulation in Healthcare (IMSH), Jan. 10-14, 2015, USA.
  60. Moelmann C, Davis P, Getz J, Pham A, Wobith D, Sarns R, Shih AJ. A walker with integrated seat embedded toilet seat for the elderly. Proceedings of the ASME 2013 Summer Bioengineering Conference SBC2013, June 26-29, 2013, Sunriver, Oregon, USA.  
  61. Belmont B, Wang Y, Ammanath P, Shih AJ, Wrobel JS. An apparatus to quantify anteroposterior and mediolateral shear reduction in shoe insoles. 2013 American Pediatrics Medical Association (APMA) Annual Scientific Meeting, July 21-25, 2013, Las Vegas, Nevada, USA.
  62. Tai B, Wang A, Plott J, Shih AJ, McKean E, Sullivan S. Design of physical surgical simulator for drilling in the expanded endonasal approach to skull base. 23nd North American Skull Base Society Annual Meeting, Feb 15-17, 2013, Miami, Florida, USA.
  63. Tai B, Shih AJ, McKean E, Sullivan S. A thermal injury alarm system in the expanded endonasal approach to the skull base. 22nd North American Skull Base Society Annual Meeting, Feb 17-19, 2012, Las Vegas, Nevada, USA.
  64. Gleason MA, Moore JZ, Shih AJ, Brown CA. Characterizing radii on the tips of biopsy needles. 2011 Spring Topical Meeting on Structured and Freeform Surfaces, March 7–8, 2011, University of North Carolina at Charlotte, Charlotte, North Carolina, USA.
  65. Shih AJ, Moore JZ, McGill CS, McLaughlin PW, Zhang Q, Zheng H. Biopsy needle cutting edge rake and inclination angles modeling of plane needles. 2011 NSF CMMI Research and Innovation Conference, Jan 4-7, 2011, Atlanta, Georgia, USA.
  66. Tai B, White SB, Stephenson DA, Shih MQL deep-hole drilling workpiece temperature. 2011 NSF CMMI Research and Innovation Conference, Jan 4-7, 2011, Atlanta, Georgia, USA.
  67. Shih AJ, Dodde R, Chen R, Advincula A. A novel surgical thermal management system in tissue machining. 2011 NSF CMMI Research and Innovation Conference, Jan 4-7, 2011, Atlanta, Georgia, USA.
  68. Shih AJ, McGill CS, Miller SF, Arul S, Kruger GH. Localized metal matrix composite formation on spot friction welding joint strength. 2011 NSF CMMI Research and Innovation Conference, Jan 4-7, 2011, Atlanta, Georgia, USA.
  69. Shih AJ, Moore JZ, McGill CS, McLaughlin PW, Zhang Q, Zheng H. Biopsy needle cutting edge rake and inclination angles modeling of plane needles. 2009 NSF CMMI Research and Innovation Conference, June 22-25, 2009, Honolulu, Hawaii, USA.
  70. Shih AJ, Arul S, Kruger GH, Miller SF, Pan TY. Spot friction weld joint strength improvement through localized metal matrix composite formation. 2009 NSF CMMI Research and Innovation Conference, June 22-25, 2009, Honolulu, Hawaii, USA.
  71. Gee JS, Dodde RE, Chastagner MW, Chen KR, Geiger JD, Shih AJ. Surgical thermal management system for tissue machining. 2009 NSF CMMI Research and Innovation Conference, June 22-25, 2009, Honolulu, Hawaii, USA.
  72. Shen B, Shih AJ, Xiao G. Minimum quantity lubrication (MQL) grinding using vitrified CBN wheels. 2009 NSF CMMI Research and Innovation Conference, June 22-25, 2009, Honolulu, Hawaii, USA.
  73. Bastawros AF, Chandra A, Teomete E, Shih Analysis of wire saw process parameters for cutting of ductile materials. 2008 NSF CMMI Engineering Research and Innovation Conference, Jan 7-10, 2008, Knoxville, Tennessee, USA.
  74. Kruger GH, Miller SF, Arul S, Shih AJ, Niekerk TI, Hattingh DG. Process monitoring and diagnosis of spot friction Welding. 2008 NSF CMMI Engineering Research and Innovation Conference, Jan 7-10, 2008, Knoxville, Tennessee, USA.

Back to Top